Épisodes

  • #43 How can pulp producers increase yield, and improve efficiency in cooking and the fiberline?

    #43 How can pulp producers increase yield, and improve efficiency in cooking and the fiberline?
    May 18 2026
    Cooking and fiberline processes are much like conducting an orchestra – dozens of variables must work in perfect harmony. Chip quality, liquor composition, time, temperature, washing efficiency, and bleaching stages all interact to make the final product. Traditionally, long manual test delays, raw material variability, and limited online measurements have forced mills to operate conservatively. Today, digitalization allows mills to replace guesswork with continuous, data-driven optimization. ANDRITZ addresses these challenges with a total automation and digitalization portfolio for continuous cooking and fiberline, combining PulpEye Fiber Properties Analyzer, Smart Chip Level Measurement and the ANDRITZ Advanced Process Controls as well as the ANDRITZ Digital Twins. Together, this solution upgrades the cooking and fiberline by stable, optimized, and increasingly autonomous operations. The results are impressive, including a 0.5 - 1% increase in yield, a 35% increase in Kappa stability and reduced costs in chemical and steam production. In this podcast we talk to John Watkins, Product Sales Manager – Analyzers and Advanced Process Controls at ANDRITZ about the benefits of digitalization of the cooking and fiberline processes, and how mills can can achieve higher availability, lower maintenance requirements and reduced chemicals and water usage. For more information on ANDRITZ’s digital solutions, PulpEye Fiber Properties Analyzer, Smart Chip Level Measurement and the ANDRITZ Advanced Process Controls as well as the ANDRITZ Digital Twins, visit out website: https://www.andritz.com/pulp-and-paper-en/pulp-production/automation-and-digitalization-pulp-en/automation-digitalization-solutions-fiberline
    Afficher plus Afficher moins
    18 min
  • #42 ANDRITZ ATAD - Solving the TAD energy problem

    #42 ANDRITZ ATAD - Solving the TAD energy problem
    Apr 22 2026
    The Through-air Drying (TAD) process has been well accepted across the tissue industry as a major breakthrough in terms of final product quality; however, the process is notoriously known for its excessive energy demands. ANDRITZ has come to the rescue with the ATAD concept, which is set to revolutionize the energy-intensive demand of TAD production. ANDRITZ has tackled the TAD energy challenge head on by launching ATAD (Advanced TAD) - a groundbreaking innovation designed to slash drying energy use by up to 20%. Crucially, the energy reduction takes place while preserving the premium quality that makes TAD so appealing. Developed through years of research and testing at the ANDRITZ state-of-the-art PrimeLine TIAC pilot plant in Graz, Austria, ATAD addresses the core challenge by removing more water from the sheet before it enters the energy-intensive TAD drying drums. In this podcast we talk to ANDRITZ experts Paul Richards, Senior Technology Manager for Tissue and Grade Owner for TAD & Hybrid technologies, and Boris Jancic, Head of the Tissue Pilot Plant, about ATAD and how it will revolutionize energy challenges in TAD tissue production. For more information on ANDRITZ’s ATAD concept visit our website: https://www.andritz.com/pulp-and-paper-en/paper-production/esg-paper-industry-sustainability/esg-tissue-sustainability
    Afficher plus Afficher moins
    14 min
  • #41 Can fiber quality, energy consumption and raw material efficiency be automated in panelboard production?

    #41 Can fiber quality, energy consumption and raw material efficiency be automated in panelboard production?
    Mar 13 2026
    Panelboard producers have a major challenge when balancing fiber quality, energy consumption, and raw material efficiency. Since 80% of the board is wood fiber, any small variation in fiber length or width has a huge impact on the final product. Traditionally, quality checks are done offline and intermittently, meaning operators had to rely on experience rather than data. The biggest challenge is how to gain visibility and control, knowing what’s happening in real time. To alleviate these challenges, ANDRITZ has developed MDFEye, an innovative measuring system that continuously analyzes fiber properties right after refining, using machine vision and data analytics to measure over 150,000 fibers per sample every few minutes right after the refining. When combined with ANDRITZ Advanced Process Controls (APC), MDFEye allows for closed-loop control of refining and drying processes, automatically adjusting parameters to maintain consistent quality and to optimize energy use. The results? Up to 10% of kWh per ton in energy savings, better internal bond prediction, and reduced glue and wood consumption, turning traditional MDF production into a smarter, more autonomous operation. In this podcast, we take a deep dive into the panelboard industry with Genc Islamaj, Senior Sales Manager Automation and Digitalization, and former Product Manager of the MDFEye at ANDRITZ. In this podcast we discover how MDFEye and Advanced Process Controls technologies are helping manufacturers achieve a new level of process stability, energy efficiency, and product quality through smart, data-driven control. For more information on ANDRITZ’s MDFEye and Advanced Process Controls technologies visit our website: https://www.andritz.com/products-en/pulp-and-paper/automation-and-digitalization-paper-en
    Afficher plus Afficher moins
    21 min
  • #40 What key enhancements can the addition of a shoe-blade gap former make to paper production?

    #40 What key enhancements can the addition of a shoe-blade gap former make to paper production?
    Feb 24 2026
    Maximizing efficiencies and flexibility on paper machines is essential in the highly competitive market of paper and board production. Producers are now actively looking for flexibility in new machine lines or alternatively have reached the limit of their existing forming technology. ANDRITZ‘s PrimeForm TW Shoe-Blade GapFormer provides a highly flexible solution that enables strength and formation with operating speeds of 1600 m/min and a wide range of grades and furnishes, with single-ply basis weight references from 30-250 gsm. As well as for installations in new machines, the former is ideal for fast and uncomplicated rebuilds as the basics of the are already installed, for example frame and rolls, remain unchanged. ANDRITZ simply implements the shoe-blade technology in the forming area. With the Shoe-Blade GapFormer, it is possible to add another grade or to convert quickly to a different grade, for example packaging paper. In this podcast we talk to Lawrence William, Global Product Manager Forming, Paper & Tissue Division, ANDRITZ, to find out the about the benefits of the Shoe-Blade GapFormer which include adjustability, flexibility and a truly pulsation free shoe design. For more information on ANDRITZ’s PrimeForm TW Shoe-Blade Gap Former visit our website: https://www.andritz.com/products-en/group/pulp-and-paper/paper-production/paper-board-machines/primeform-forming
    Afficher plus Afficher moins
    24 min
  • #39 Can product uniformity be maintained in the production of nonwovens by automating the process?

    #39 Can product uniformity be maintained in the production of nonwovens by automating the process?
    Dec 2 2025
    One of the toughest challenges in the production of nonwovens is maintaining product uniformity at high speeds. Issues like the 'smile effect,' where fiber accumulates on the edges of the mat, lead to quality losses and wasted material. Producers are also under pressure to cut costs, save fiber, and reduce manual interventions, all while meeting sustainability goals such as lowering energy usage and emissions." The actual process of producing nonwovens can be described as similar to baking bread - but at industrial speed. Fiber mats have to be laid evenly, layer after layer, without clumping at the edges or thinning in the middle. Even a small imbalance can create wasted material, downtime, and product inconsistency. Traditionally, operators had to constantly adjust settings to avoid this, but that is all changing with autonomous control. ANDRITZ has developed ProWin™, an autonomous web profiling solution that combines the strengths of its ProDyn™ and ProWid™ technologies, together with Advanced Process Controls systems. The results? Up to 15% faster production speeds, 10% fiber savings, more even fabric weight, and dramatically reduced operator workload. In this podcast we talk to Guillaume Julien, Global Sales Director, Nonwoven, ANDRITZ about addressing the challenges of maintaining product uniformity at high speeds through a smart combination of technologies and automated regulation. For more information on ProWin please visit our website: https://www.andritz.com/nonwoven-textile-en/technologies/needlepunch/web-profiling-pro-win
    Afficher plus Afficher moins
    9 min
  • #38 What advantages does the acquisition of Diamond Power International bring to ANDRITZ customers?

    #38 What advantages does the acquisition of Diamond Power International bring to ANDRITZ customers?
    Nov 11 2025
    ANDRITZ recently acquired Diamond Power International, a global company which brings a large range of complimentary cleaning products and services to boiler operators in the pulp, paper and power industries. The company has been supplying specialist boiler cleaning services for over 100 years, and has a comprehensive portfolio covering boiler cleaning systems and process optimization tools including sootblowers, replacement parts, and upgrades, boiler cleaning controls, cameras and monitoring, port rodders and dampers gauges and level indicators. Diamond Power’s products have been developed to assist customers in solving challenges, improving efficiencies as well as enabling them to respond to changing markets, new fuels, and increasing environmental regulations. In this podcast we talk to Henrik Wikstedt, Senior Vice President, Division Manager Recovery & Power Service, ANDRITZ, and Michael Michael, President of Diamond Power International, now a member of ANDRITZ Group.Find out how ANDRITZ customers will benefit from the expanded product and service range, global reach and access to a worldwide service network, financial stability, and lifecycle support for efficient and reliable boiler performance. For more information, visit our website: https://www.andritz.com/products-en/pulp-and-paper/diamond-power
    Afficher plus Afficher moins
    17 min
  • #37 How can tissue manufactures realize hidden production potential with digitalization?

    #37 How can tissue manufactures realize hidden production potential with digitalization?
    Oct 15 2025
    The tissue industry is driven by high-speed production, fast grade changes, and constant pressure to reduce waste and energy use. However, many mills struggle with visibility and knowing exactly where and why losses happen. From sheet breaks and quality deviations to energy and fiber overuse, hidden inefficiencies cause losses everyday. ANDRITZ addresses this challenge with an integrated portfolio of digital solutions. Central to this offering is Metris Insights, a data platform tailored for tissue production. Enhanced by Optimization of Process Performance (OPP) and Metris Advanced Process Control (APC), it enables real-time optimization, automation, and efficiency improvements across production operations. Metris Insights integrates data from all mill systems into a single, user-friendly platform, providing real-time dashboards, statistical process control, machine learning tools, cost and energy tracking, soft sensors for key process variables, and automated reporting and alerts. In short, the combination of Metris Insights, OPP and APC gives operators and decision-makers the visibility they need to move from guessing to knowing and from reacting to optimizing. In this podcast we speak to John Schroeder, Director Packaging and Tissue Digital Solutions from ANDRITZ about the immediate positive improvements digitization brings to tissue production processes. For more information on Metris Insights and OPP in tissue production visit our website: https://www.andritz.com/pulp-and-paper-en/pulp-production/automation-and-digitalization-pulp-en/automation-digitalization-solutions-fiberline/metris-plant-insights
    Afficher plus Afficher moins
    20 min
  • #36 How to increase revenues by lifting the quality of the wood chip side stream in sawmills?

    #36 How to increase revenues by lifting the quality of the wood chip side stream in sawmills?
    Sep 17 2025
    As demand for quality wood chips increases at pulp mills across the globe and the sourcing of logs in some regions becomes more difficult, the wood chip side stream at sawmills can often be a significant revenue source. This means sawmill operators have a genuine opportunity to fill the gap by supplying wood chips to pulp mills. However, top quality chips are key. To ensure the production of quality chips at sawmills located across the globe, ANDRITZ mission in the supply of chipping technology is to always work to improve chip quality, reduce operational costs, increase uptime and maintain consistency of output – all in the safest of environments. ANDRITZ sawmill products include debarking and chipping equipment, including its PowerHead canter and the well-known TurnKnife system. This equipment is in use in sawmills all around the world – operating on various wood species in a variety of climates. In this podcast we talk to two ANDRITZ experts, Andreas Henning, Global Product Group Manager, and Adrian Yeoman, Customer Service Manager for Australia and New Zealand, about how sawmills can open up new revenue streams by utilizing the very best in chipping technology. For more information, visit our website: https://www.andritz.com/products-en/pulp-and-paper/service-solutions/sawmill-chipping
    Afficher plus Afficher moins
    16 min